GID-50 Dual Output Switching Power Supply
Features
- High efficiency,high reliability,low cost
- Universal AC input /full range
- 100% full load burn-in test
- Protections: Short circuit/ Over load/ Over voltageCooling by free air convection
- Fixed switching frequency at 50KHz
- 1 year warranty
- Dimensions: 159*97*38mm (L*W*H)
- Isolated ouput & GND for CH1, CH2
| MODEL |
GID-50A |
GID-50B |
GID-50C |
GID-50D |
| CH1 |
CH2 |
CH1 |
CH2 |
CH1 |
CH2 |
CH1 |
CH2 |
| OUTPUT |
DC Voltage |
5V |
5V |
13.5V |
13.5V |
27V |
27V |
5V |
13.5V |
| Voltage Tolerance |
±1% |
±2% |
±1% |
±2% |
±1% |
±2% |
±1% |
±2% |
| Rated Current |
6A |
2A |
1.8A |
1.8A |
0.9A |
0.9A |
5A |
1.7A |
| Current Range |
0.5-6A |
0-2A |
0.3-2A |
0-2A |
0.18-1A |
0-1A |
1-5A |
0-2A |
| Rated Power |
40W |
48.6W |
48.6W |
48W |
| Ripple & Noise |
50mVp-p |
100mVp-p |
100mVp-p |
150mVp-p |
100mVp-p |
150mVp-p |
50mVp-p |
150mVp-p |
| DC Adjustment Range |
-5%,+10% |
±11% |
±11% |
-5%,+10% |
| Setup, Rise, Hold Time |
1600ms, 50ms, 100ms at full load |
| INPUT |
Voltage Range |
85～264VAC 47～63 Hz；120～370VDC |
| AC Current |
1A/115 V0.6A/ 230 V |
| Efficiency |
66% |
70% |
72% |
68% |
| Inrush Current |
Cold start 18A/115V 36A/230V |
| Leakage Current |
＜3.5 mA/240VAC |
| PROTECTION |
Over Load |
105%～150% |
| Protection: Hiccup mode, recovers automatically after fault condition is removed |
| Over voltage |
125%～150% |
| Protection: Hiccup mode, recovers automatically after fault condition is removed |
| ENVIRONMENT |
Working Temp., Humidity |
-10℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
Withstand Voltage |
I/P-O/P:1.5KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| STANDARD |
Safety Standard |
Design refer to UL1012 |
| EMC Standard |
Design refer to FCC Part15 |
| OTHERS |
Weight |
0.54Kg |
| Packing |
24pcs / 13.8kg / 0.75CUFT |
| NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|
