HS-150B Single Output Switching Power Supply
Features
- Protections:Short circuit/Over load/Over voltage
- Cooling by free air convection
- Built in LED indicator for power on
- 100% full load burn-in test
- Fixed switching frequency at65KHZ
- High Efficiency, long life,,high reliability
- 1 year warranty
- Dimensions: 199*98*38mm (L*W*H)
| MODEL |
HS-150B-5 |
HS-150B -7.5 |
HS-150B -12 |
HS-150B -15 |
HS-150B -24 |
HS-150B -48 |
| OUTPUT |
DC Voltage |
5V |
7.5V |
12V |
15V |
24V |
48V |
| Rated Current |
25A |
18A |
12.5A |
10A |
6.3A |
3.2A |
| Current Range |
0-25A |
0-18A |
0-12.5A |
0-10A |
0-6.25A |
0-3.2A |
| Voltage Tolerance |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Load Stability |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
| Rated Power |
125W |
135W |
150W |
150W |
151.2W |
153.6W |
| Ripple & Noise |
100mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
| DC Adjustment Range |
4.75-5.5V |
6.75-8.25V |
10.8-13.2V |
13.5-16.5V |
21.6-26.4V |
42-52.8V |
| Setup, Rise Time |
800ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load |
| Hold Time |
28ms/230VAC 20ms/115VAC at full load |
| INPUT |
Voltage Range |
90 ~ 132VAC /180~264Selected by switch ， 248 ~ 373VDC |
| Frequency |
47~63Hz |
| Efficiency |
80% |
82% |
83% |
84% |
86% |
87% |
| AC Current |
3A/115VAC 2A/230VAC |
| Inrush Current |
Cold start 40A/230VAC
|
| Leakage Current |
<2mA / 240VAC |
| PROTECTION |
Over Load |
110 ~ 150% rated load |
| Protection: Hiccup mode, recovers automatically after fault condition is removed |
| Over voltage |
5.75~6.75V |
8.65~10.15V |
13.8~16.2V |
17.25~20.25V |
27.6~32.4V |
55.2~64.8V |
| Protection: Hiccup mode, recovers automatically after fault condition is removed |
| ENVIRONMENT |
Working Temp., Humidity |
-10~+70℃，20 ~ 90% RH
|
| Storage Temp., Humidity |
-20 ~ +85℃ , 10 ~ 95% RH |
| Vibration |
10 ~ 500Hz, 5G 10min./ 1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
Withstand Voltage |
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD |
Safety Standard |
Design refer to UL1012, EN60950
|
| EMC Standard |
Design refer to EN55022 CLASSA |
| OTHERS |
Weight |
0.62Kg |
| Packing |
30pcs/19.3Kg/1.22CUFT |
| NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|
