GDR-60

	Bookmark This Page
	Print This Page

	Live Messenger
	Skype Me
	Peter@greegoo.com
	Catalogue Download
Send Inquiry
Add to Inquiry Basket \| View Inquiry Basket

Industrial DIN Rail Power Supply (60W Single Output GDR-60)

Feature

- Universal AC input/Full range
- Protections: Short circuit / Overload /Over voltage
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- NEC class 2 / LPS compliant
- Built in DC OK active signal
- LED indicator for power on
- No load power consumption<0.75W
- 100% full load burn-in test
- 3 years warranty

Model		GDR-60-5	GDR-60-12	GDR-60-24	GDR-60-48
Output	DC Voltage	5V	12V	24V	48V
	Rated Current	10A	5A	2.5A	1.25A
	Current Range	0-10A	0-5A	0-2.5A	0-1.25A
	Rated Power	50W	60W	60W	60W
	Ripple & Noise	80mVp-p	120mVp-p	150mVp-p	200mVp-p
	DC Voltage Adj.Range	5-6V	12-15V	24-30V	48-56V
	Voltage Tolerance	+2.0%	+1.0%	+1.0%	+1.0%
	Line Regulation	+1.0%	+1.0%	+1.0%	+1.0%
	Load Regulation	+1.0%	+1.0%	+1.0%	+1.0%
	Setup, Rise Time	500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
	Hold Up Time (Typ.)	50ms/230VAC 120-370VDC
Input	Voltage Range	85-264VAC 120-370VDC
	Frequency range	47-63Hz
	Efficiency	78%	86%	88%	87%
	AC Current(Typ.)	1.8A/115VAC 1A/230VAC
	Inrush current(Typ.)	Cold start 30A/115VAC 60A/230VAC
	Leakage current	<1mA/240VAC
Protection	Over Load	105%~150% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed
	Over Voltage	6.25-7.25V	15.6-18V	31.2-36V	57.6-64.8V
	Over Voltage	Protection type: shut down o/p voltage, re-power on to recover
Function	DC OK AC tive signal	Relay contact rating(max.):30V/1A resistive
Environment	Working temp.	-20-+70℃ (Refer to output load derating curve)
	Working humidity	20℃~90℃, RH non-condensing
	Storage Temp & Humidity	-40℃~+85℃, 10%~95 %RH
	Temp. coefficient	+0.03%/℃(0-50℃)
	Vibration	Component:10-500Hz, 2G 10min./1cycle, 60min, each along X,Y,Z axes;Mounting:Compliance to IEC60068
Safety & EMC	Safety standards	UL508, TUV EN60950-1 approved, NEC class 2 / LPS compliant(24V, 48V only)
	Withstand Voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Is olation resistance	I/P-O/P, I/P-FG, O/P-FG:>100M Ohms/500VDC 25℃ 70%RH
	EMI conduction	Compliance to EN55011,EN55022 (CISPR22), EN61204-3 Class B
	Harmonic current	Compliance to EN61000-3-2,-3
	EMS immunity	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
Others	Dimension Mibf	299.2k hrs min, MIL-HDBK-217F(25˚C)
	Dimension	40x90x100mm(WxHxD)
	Packing	0.3kg; 40pcs/12kg/0.03cbm

Outline and dimension

Mechanical Specification

Mechanical Specification

Block Diagram

Block Diagram

Derating Curve Output Derating VS Input Voltage

Derating Curve

DC OK Relay Contact

Contact.Close	When.the.output.voltage.reaches.the.adjusted.output.voltage.
Contact.Open	When.the.output.voltage.drop.below.90%.output.voltage.
Contact.Ratings.(max.)	30V/1A resistive.load

Notes:

-
-

-
-

-

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
Tolerance : includes set up tolerance,line regulation and load regulation.
The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.