PSP-1000 With PFC and Parallel Function Switching Power Supply
Features
- High efficiency, high reliability
- Universal AC input/ full range
- Built-in active PFC function, PF>0.95
- Protections: Short ciruit/ Over load /Over voltage/Over temperature
- Built-in constant current limiting circuit
- Forced air cooling by built-in DC fan
- Current sharing up to 2 units or 2000W
- Built-in remote ON-OFF control and remote sense function
- Built-in active current sharing and parallel function
- 1 year warranty
- Dimensions: 278*129*127mm（ L*W*H）
| MODEL |
PSP-1000
-5 |
PSP-1000
-12 |
PSP-1000
-13.5 |
PSP-1000-15 |
PSP-1000-24 |
PSP-1000-27 |
PSP-1000-48 |
| OUTPUT |
DC Voltage |
5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Voltage Tolerance |
±6.0% |
±3.0% |
±2.0% |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
| Rated Current |
145A |
75A |
67A |
60A |
37.6A |
33.6A |
19A |
| Current Range |
0-145A |
0-75A |
0-67A |
0-60A |
0-37.6A |
0-33.6A |
0-19A |
| Rated Power |
725W |
900W |
904.5W |
900W |
902.4W |
907.2W |
912W |
| Peak Value Power |
800W |
1000W |
1000W |
1000W |
1000W |
1000W |
1000W |
| Ripple & Noise |
100mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
| DC Adjustment Range |
-5%, +10% |
-17%, +10% |
±11% |
-10%+20% |
-17%,+10% |
±11% |
-15%,+17% |
| Setup, Rise, Hold Time |
1.5s,50ms,24ms/230VAC 1.5s,50ms,24ms/115VAC at full load |
| INPUT |
Voltage Range |
90～264 VAC 47-63Hz；127～370VDC |
| Power Factor |
PF>0.95/230VAC PF>0.95/115VAC at full load |
| AC Current |
14A/115 VAC 7A/230VAC |
| Efficiency |
77% |
84% |
84% |
84% |
86% |
86% |
86% |
| Inrush Current |
Cold start 40A/115VAC 70A/230VAC |
| Leakage Current |
<2mA/240VAC |
| PROTECTION |
Over Load |
115%~140% |
| Protection: Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage |
115%～135% |
| Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp |
95 (TSW1) Detect on the heatsink of PFC MOSFET 90 (TSW2) Detect the winding of output choke |
| Protection:Shut down o/p voltage, recovers automatically after temperature goes down |
| FUNCTION |
Remote Control |
RC+/RC－:4 ~ 10VDC Power off, <0 ~ 0.8VDC Power on |
| ENVIRONMENT |
Working Temp., Humidity |
-10℃～+65℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
Withstand Voltage |
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD |
Safety Standard |
Design refer to UL1950,TUV EN60950 |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| OTHERS |
Weight |
5.2Kg |
| Packing |
3pcs/16.3Kg/1.42 CUFT |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.10% Duty cycle maximum within every 30 seconds(max.). Average output power should not exceed the rated power.
5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
|
