PSP-500 With PFC and Parallel Function Switching Power Supply
Features
- High efficiency, high reliability
- Universal AC input/ full range
- Built-in active PFC function, PF>0.95
- Protections: Short circuit/ Over load/ Over voltage/ Over temperature
- Forced air cooling by built-in DC fan
- Current sharing up to 2000W(3+1)
- With power good and fail signal output
- Built-in remote ON-OFF control and remote sense function
- 1 year warranty
- Dimensions: 278*127*63.5mm(L*W*H)
| MODEL |
PSP-500
-5 |
PSP-500-12 |
PSP-500-13.5 |
PSP-500 -15 |
PSP-500 -24 |
PSP-500 -27 |
PSP-500 -48 |
| OUTPUT |
DC Voltage |
5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Voltage Tolerance |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
| Rated Current |
80A |
41.5A |
37A |
33A |
20.8A |
18.5A |
10.5A |
| Current Range |
0-80A |
0-41.5A |
0-37A |
0-33A |
0-20.8A |
0-18.5A |
0-10.5A |
| Rated Power |
400W |
498W |
499.5W |
495W |
499.2W |
499.5W |
504W |
| Ripple & Noise |
100mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
| DC Adjustment Range |
-5%,+10% |
-17%,+10% |
±11% |
-10%,+20% |
-17%,+10% |
±11% |
-15%,+17% |
| Setup, Rise, Hold Time |
1500ms,50ms,15ms at full load |
| INPUT |
Voltage Range |
90～264 VAC 47-63Hz；127～370VDC |
| Power Factor |
0.95/230VAC 0.98/100VAC at full load |
| AC Current |
7A/115 VAC 3.5A/230VAC |
| Efficiency |
76% |
82% |
82% |
82% |
84% |
84% |
86% |
| Inrush Current |
Cold start 20A/115VAC 40A/230VAC |
| Leakage Current |
<1mA/240VAC |
| PROTECTION |
Over Load |
110%~125% |
| Protection: Constant current limiting, recovers automatically after fault condition is removed |
| Over voltage |
115%～135% |
| Protection type: Shut down o/p voltage, re-power on to recover |
| Over Temp |
RTH2≥95℃ (Detect on heatsink of Q1,Q7 power transistor & L3 output choke ) |
| Protection type: Shut down o/p voltage, re-power on to recover |
| FUNCTION |
Remote Control |
RC+/RC－:4 ~ 10VDC Power off, <0 ~ 0.8VDC Power on |
| ENVIRONMENT |
Working Temp., Humidity |
-10℃～+60℃；20%～90 %RH |
| Storage Temp., Humidity |
-20℃～+85℃；10%～95 %RH |
| Vibration |
10～500Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes |
| SAFETY |
Withstand Voltage |
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC |
| STANDARD |
Safety Standard |
Design refer to UL1950,TUV EN60950 |
| EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
|
OTHERS
|
Weight |
2.6Kg |
| Packing |
6pcs/16Kg/1.14 CUFT |
| NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
|
