SLC-P controller

Installation: built-out, directly fixed on the machine board
Material: steel for shell
Outline: length×width×height =200×78×147
Controller cable: 1.5m
Signal cable interface: aviatic plug-in (one piece for reflection, two pieces for through-beam)
Output type: passive double relay contact safety signal output
Output contact value:AC 380V 10A
Power supply: AC100-260V, 50/60Hz or 24VDC
Power consumption: 15W
Self-detection: monitor the signal processing circuit and relay contact, lock the output state in malfunction until trouble shoot.
Self-locking function: set self-locking function on request, reserve reset switch contact
Return non-protection function: can be connected with machine electrics for security allows to achieve return non-protection function

P type controller power supply factory setting set at 100-260VAC
AC100-260V(red lead) and 0V(blue lead) is AC power supply lead. For DC24V power supply, please note in the order.
The yellow-green line is earth wire.
T (green lead) and K (yellow lead) is output connection point, when the light curtain is on the light: T, K turn on while the light curtain is shading, T,K turn off.